Top 10 Best Hatchbox 3D Printer Filaments in 2017 Reviews

Finding a good hatchbox filament may seem like an easy task but it is not as one has to look at the quality of the filament they are getting and whether they are reliable. There are several factors to consider when getting one which include the material they are made with, the strength among other factors. Here is a comprehensive review on some of the top 10 best Hatchbox 3D printer filament that you may opt to get.

10.HATCHBOX 1.75mm Gold PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

10.HATCHBOX 1.75mm Gold PLA 3D Printer Filament - 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.05mm

Weighing about 1 KG, the 3D printer filament has a diameter ranging between 1.70 mm and 1.80 mm. It has been made using polylactic acid which has been sealed with Desiccant in vacuum. Its best operating nozzle temperature falls between 180-210 degrees Celsius. The filament has a spool diameter of 8 inches, a width of 2.5 inches and a hub hole diameter of 1.25 inches.

9. NinjaFlex TPE Filament, 1.75 mm Diameter, .50 kg Spool, Midnight


The NinjaFlex Tpe filament comes separately with the printer and is meant for use with fused-filament 3D printers. The material used to make it, thermoplastic elastomer, makes it strong, flexible and leaves the printed parts with magnificent resistance from abrasion. The chances of the printed layers separating when the material is flexed or stretched are reduced to minimum. The filament is to be used within temperatures of 210-235 degrees Celsius

8.Hatchbox 1.75mm Black PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

8.Hatchbox 1.75mm Black PLA 3D Printer Filament - 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.05mm

The spool weighs about 1 kilogram. The filament has a diameter of 1.75 mm with an accuracy of more or less than 0.05 mm. The 3D printer filament has been made using polylactic acid which has been sealed in vacuum with desiccant. The temperatures within which the filament should be used is within 180-210 degrees Celsius.

7. HATCHBOX 1.75mm White ABS 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

7. HATCHBOX 1.75mm White ABS 3D Printer Filament - 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.05mm

This Hatchbox printer filament weighs about 1 kilogram and has a diameter of 1.75 mm which has been measured to an accuracy of more or less than 0.05 mm. The filament has been made using Acrylonitrile Butadiene Styrene then sealed in a vacuum with Desiccant. The filament is best used with heated build platform and a temperature range of between 210-240 degrees Celsius.

6.HATCHBOX 1.75mm Blue PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

6.HATCHBOX 1.75mm Blue PLA 3D Printer Filament - 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.05mm

Made using Polylactic Acid and sealed under a vacuum with Desiccant, this 3D printer filament weighs about 1 KG. Its diameter ranges between 1.70 mm to 1.80 mm. The recommended nozzle temperatures within which the filament works best is between 180-210 degrees Celsius. It has a spool diameter of 8 inches, width of 2.5 inches and hob hole diameter of 1.25 inches.

5. XYZprinting RFPLAXUS03H Da Vinci Series PLA Cartridge Filament, Clear Red

5. XYZprinting RFPLAXUS03H Da Vinci Series PLA Cartridge Filament, Clear Red

Weighing about 1.3 pounds, this product produces high quality printings with its proprietary PLA material used to make it. It has a clear tangerine color. The Da Vinci PLA cartridge filament has an outside diameter of 1.75 mm.

4. Taulman 3D 618 Natural Nylon Filament for 3D Printer 1.75mm 2 1lb Spool Bundle MADE IN USA

4. Taulman 3D 618 Natural Nylon Filament for 3D Printer 1.75mm 2 1lb Spool Bundle MADE IN USA

This beige color Taulman 3D filament printer has been made using nylon which makes it reliably strong and durable. The nylon filament produces no odors as one prints as it doesn’t emit any dangerous fumes. The filament resists oils, alcohols and much alkaline compounds too. This product can be colored with most of the existing clothing dyes.

3. Filabot 910175 Taulman 910 Alloy, 1.75″ Filament Diameter, Natural

3. Filabot 910175 Taulman 910 Alloy, 1.75

The Taulman 3D natural nylon filament is best used at a recommended temperature of 245 degrees Celsius. It has a BuildTak which has been coated with hot PVA and has been glass heated to a temperature of 45 degrees Celsius with a coat of PVA. The print is bed or cold. It has a tensile strength of 8,100 PSI. The product weighs about 1 pound and has an outside diameter of 1.75 inches.

2. Filabot TB1 Taulman BRIDGE Filament, 1.75 mm, White

2. Filabot TB1 Taulman BRIDGE Filament, 1.75 mm, White

This product has been made using nylon and has an outside diameter of 1.75 inches. The filabot 3D printer filament is white in color and weighs about 15.84 ounces. Its material makes it cost lower yet makes it functionality as good as other filaments. The filament has a recommended printing temperature of 225 degrees Celsius and prints well on cold bed.

1.3rDment ABS Filaments – 1.75mm,1kg Spool – Compatible with All FDM 3D Printers – Lulzbot Mini, Ultimaker, Prusa i3

1.3rDment ABS Filaments - 1.75mm,1kg Spool - Compatible with All FDM 3D Printers - Lulzbot Mini, Ultimaker, Prusa i3

This 3D printer filament has a diameter of about 1.75 mm. It comes in an assorted color and has been made using abs material. The 3rDment filament is strong, flexible and ensures high quality 3D printing.

Finding a 3D printer has just been made easy for you with the above guide. The filaments mentioned above have proved to function reliably and unfailingly. Their online reviews show that their users are satisfied with them. The factors to consider when getting a good hatchbox printer filament have been outlined clearly and one should take good note of them.

Leave a Comment